BOC Gases 2.5M Walk-In Hazvault – Case Study

The clients requirements

Mr Des Kelly of BOC Gases contacted Chemstore and outlined a project for a container similar to the 2.5M Walk-In Store that can be used for the storage of cleaning products and equipment on their site in Dublin.

Client Testimonial


“Regarding our recent purchase of a 2.5m Walk-In Hazvault. I consider this product to be excellent, and the level of service Ken Kelly & the Chemstore team provided was second to none. Working to a very tight schedule, they designed, constructed and delivered this unit which was custom built to very high standards & quality levels and complies to the BOC standards. They met all our requirements including cost-effective solutions to our needs and also exceeds current EPA guidelines and our SHEQ standards. I would have no hesitation in working with or recommending Chemstore & Ken in the future.”

Des Kelly

Dublin Inventory & Stores Supervisor


You can check out our entire Hazvault range by clicking here.

  • 2.5M Walk-In Hazvault Front
  • 2.5M Walk-In Hazvault Front Open
  • 2.5M Walk-In Hazvault Side & Front

Our solution

2.5m Walk-In Hazvault


Hazvault logo white


Overall dimensions: (L) 2,500mm x (W) 2,500mm x (H) 2,500mm


Construction: Robust all welded 100 x 50mm steel box section frame.


Storage: 500mm deep, fixed storage shelves fitted on sides of unit to allow storage of small containers.


Sump: Fully welded and leak tested, corrosion resistant coated, steel sumps fitted under floor level, capacity 800L (exceeds current EPA guidelines which state that the bund capacity should be a minimum of 25% of the total volume to be stored).


Floor: Removable hot dipped galvanized grid mesh floor & shelving.


Lifting: Unit is fitted with forklift channels and roof-fixed crane lifting points to allow for easy unloading and relocation if required.


Access: Single hinged access door fitted with deadlock locking mechanism.


Ventilation: Louvred cladding panels ensure airflow throughout the store.


Finish: Fully welded 2mm sheet steel used throughout to maximize security. All steel coated with high build Acrylic paint finish system to ISO 3233:1998.

Choice of colours. Standard: Blue RAL 5017


Signage: Relevant safety signs fitted to BS499 on all units.

Specific signage available on request.

Do you have a similar need?
Call us today on
061 327 792 or
Book a site visit