Gasvault – Solutions for Compressed Gases – Gas Cylinder Stores

Gasvault logo white

Chemstore’s range of solutions for Gas Cylinder Storage

The range Gas Cylinder Stores are specifically designed to provide a safe, ergonomic range of compliant storage solutions for gas cylinders.

  • Designed and manufactured in accordance with the BCGA (Guidance for the storage of Gas Cylinders in the workplace).
  • Full structural certification and a 10-year structural warranty available on GasVault units.
  • All cylinders are stored upright and secured with chain restraints.
  • Open mesh panels are used to prevent the accumulation of harmful/explosive gases.
  • Cylinders of incompatible gases can be stored in the same store by employing a fire rated segregation wall.
  • Empty cylinders can be segregated from full containers and are clearly labelled.
  • If stored externally, weather-proof roofing is required to protect cylinder fittings from rainwater.
  • Raised flooring should also be used to protect the cylinders from corrosive bases &  groundwater erosion.

 

Gas Cylinder Cage Features

 

  • Heavy-duty steel construction for Gas Cylinder Storage
  • Option of sliding or hinged access doors – fully lockable.
  • Mesh gates and ventilation panels ensure adequate ventilation and prevent a build-up of potentially explosive gas leaks.
  • Non-slip galvanised floor & ramp
  • Firewalls supplied where required
  • Full range of sizes to suit all cylinder sizes and applications
  • All units have fixed arms and retaining chains to prevent accidents and ensure maximum use of space
  • Delivered to site fully assembled
  • Units can easily be relocated with fork trucks
  • No site works are required
Bucket Dolly

The Grit Guard Bucket Dolly features 5 heavy-duty urethane casters that last longer and roll smoothly over cracks.

Two of the casters lock, holding your bucket in place even on steep inclines.

Rugged Bucket Dolly supports up to 250 pounds and is securely held in place with three thumb screws.

Dolly will fit most 3.5 gallon, 4 gallon, 5 gallon and 6 gallon bucket.

Grit Guard Bucket Dolly allows for smooth bucket maneuvering.

Cylinder Wall Racks

Poly Bumper Brackets

  • Spark resistant
  • Lightweight and easy to manoeuvre.
  • Rugged construction is durable and robust.
  • Will not rust or corrode under harsh weather conditions.
  • Chemical resistant to submersion / splashes.
  • Simple or double cylinder designs

Steel Wall Brackets

  • These racks must be fixed to the wall at a height of at least two-thirds of cylinder height.
  • Supplied with pre-drilled fixing holes (fixings not supplied).
  • All racks fitted with steel link retention chains.
  • Finish: Blue epoxy.
  • Racks can be designed to suit any number of cylinders.

Holder / Wall Braket – Cylinder

  • Strong wall fixingsteel frames to hold 2 gas cylinders securely and safely. They should be positioned to the wall at approx. half of cylinder height.

Cylinder Holders

  • Cylinder holder, stainless steel, for ‘D’ or ‘E’ (100mm dia.) cylinders. Supplied with loose support base for ‘D’ cylinders.
  • Cylinder holder, stainless steel, for ‘F’ (150mm dia.) cylinders.
Gas Cylinder Trolleys

Economy Gas Trolley

  • Single / double cylinder trolley with easy roll heavy duty wheel.
  • Safety chain in heavy duty steel.

Welders Trolley

  • For convenient use of 1 oxygen cylinder and 1 acetylene cylinder with rods and cable holders.
  • Steel link retaining chains fitted.
  • Wheels: 400mm dia. pneumatic or solid rubber tyred wheels with roller bearings.

Finish: Blue epoxy

Single / Dual Cylinder Dolly

  • Spark resistant.
  • Lightweight and easy to manoeuvre.
  • Rugged construction is durable and robust.
  • Will not rust or corrode under harsh weather conditions.
  • Chemical resistant to submersion / splashes.
  • 1 x ø300mm OR 2 x ø300mm cylinder capacities.
  • Pneumatic wheel option for external use or rough terrain.
  • Counterbalance design ensures minimal force is required for use.

12-Section Cylinder Trolley
Special trolley with 12 sections suitable for ‘D’ or ‘E’ cylinders, with non-slip rubber base board and push handle one end

Domicilary Cylinder Trolley
Light duty trolley for home care use. to hold the ‘AF’ gas culinders distributed by chemists.
The cylinder is held securely in place by the recessed base plate, and a captive chain.
The hook attached to the handle allows safe stowage of face mask and tubing

Cylinder Lifting Cradles

Cylinder cradles are designed for use with overhead lifting gear.

  • For use with forktruck / overhead lifting gear.
  • Robust all welded steel construction.
  • Top & bottom cylinder chain restraints.
  • ø180 – ø305mm cylinders
Free-Standing Cylinder Racks

2-6 Pack Poly Cylinder Racks

Maximise floor space while eliminating clutter and safety hazards by properly storing your industrial cylinders. Efficiently sized to easily move through standard doorways. Forkliftable! Handles cylinders 3″ to 10″ diameter. Optional accessory strap can be added to bottom for extra security.

  • Spark resistant.
  • Lightweight and easy to manoeuvre.
  • Rugged construction is durable and robust.
  • Will not rust or corrode under harsh weather conditions.

Chemical resistant to submersion / splashes.

Steel Cylinder Racks

  • Single or double sided for 2, 3, 4 or 6 cylinders.
  • Single sided units have rear frames pre-drilled. We strongly recommend that single sided units are fixed to the wall.
  • Fully welded construction throughout.
  • Steel link retention chains fitted.
  • Finish: Blue epoxy.
Cylinder Lifting Trolleys

Combined cylinder trolley / lifting cradle

One product allowing cylinders to be moved with either overhead lifting gear, or wheeled into position.

  • For use with forktruck / overhead lifting gear.
  • Robust all welded steel construction.
  • Top & bottom cylinder chain restraints.
  • ø180 – ø305mm cylinders
Manual Pumps

SC20

  • For all petroleum products and oil grades
  • Rotary action
  • Cast iron construction
  • 20 litres per minute
  • 1250 mm delivery hose
  • High Quality

PR9

  • For aggressive chemicals e.g chlorinated solvents, caustics etc. Inks
  • Reversable rotary action
  • Ryton construction
  • Viton seals
  • Teflon gaskets

SS3

  • For aggressive chemicals, solvents, de-greasers etc.
  • Lift action
  • Stainless steel construction
  • Teflon seals
  • 0.65 Litre/Stroke
  • 3/4 outlet spout

PP9

  • For water based acid solutions, alkalis, salts and petroleum products
  • Reversable rotary action
  • Polypropylene construction
  • Viton seals
  • Polyethylene gaskets
Forklift Attachments

Grab-O-Matic 1-DLR
Single parrot beak drum handler
Fork attachment single drum handler which grips the rim on drums of various diameters & sizes, damaged or new.

Features: The Grab-O-Matic 1-DLR can be quickly and easily converted to a 2-DLR (2 drum handler) by moving the pillars to one side of the long reach frame and adding a pillar and gripping head to the vacant side, there is also height adjustment up and down the pillar for small drums. The gripping heads are interchangeable so special heads can be exchanged such as the SS/AL head for mauser drums.

Optional Extras: Rubber Fender at the base of the pillar for drum protection model 1-DLR-P

Note: Specials can be made to suit larger fork sizes

Grab-O-Matic 2-DLR
Double rim gripping (parrot beak) drum handler

Fork attachment double drum handler rim gripping unit for drums of various diameters and sizes, damaged or new drums.

Features: The Grab-O-Matic 2-DLR can be quickly and easily converted to a 1-DLR by removing the pillars and placing a single pillar and head in the centre of the frame, there is also height adjustment up and down the pillar for small drums. The gripping heads are interchangeable so special heads can be exchanged such as the SS/AL head for mauser drums.

Optional Extras: Rubber Fenders at the base of the pillar for drum protection model 2-DLR-P

Note: Specials can be made to suit larger fork sizes.

Grab-O-Matic DH-1
Single Drum Handler

Fork attachment single drum handler waist gripping unit for steel drums with pronounced rolling rims and consistant diameter

Note: Specials can be made to suit larger fork sizesand/or different size drums POA

Grab-O-Matic DH-2
Double drum handler

Fork attachment double drum handler waist gripping unit for steel drums with pronounced rolling rims and consistant diameter

Note: Specials can be made to suit larger fork sizes and/or different size drums POA

Drum Top Workstation

The Drum Top Workstation can lead to a major improvement in housekeeping, saving liquid normally lost or wasted during the dispensing process by returning it back to the drum clean and free from debris, while keeping the drum head clean.

The Drum Top Workstation fits tight head drums and works with all types of rotary drum pumps.

Made of durable non-corrosive and chemically resistant polyethylene, it has an angled surface and it is fitted with a stainless steel mesh strainer, allowing spilt liquid to flow back into the drum free from debris.